[제품홍보] 6GHz USB 벡터신호발생기
페이지 정보
작성자👤 L.TechRF
본문
엘텍알에프의 신제품 USB벡터신호발생기를 소개합니다.
스펙
Specification:
Frequency Range: 1MHz to 6.1GHz (RF band) 100Hz to 1MHz (Low band), 1Hz resolution, 0.5PPM clock accuracy.
Output level range: -100dBm~+10dBm (1MHz ~4GHz), -100dBm~+0dBm (4GHz ~6.1GHz), -50dBm~0dBm (Low band), 0.25dB resolution.
Working mode: CW mode, frequency sweeping, frequency hopping, pulse modulation and simultaneous I&Q modulation(100KB data buffer).
Analog modulation: AM, FM, PM.
Digital modulation: ASK, FSK, 4FSK, GFSK, MSK, GMSK, SFSK, and more modulation signal based on the I&Q engine.
Phase modulation: BPSK, 4PSK, 8PSK, 16QAM, 32QAM, 64QAM and more modulation signal based on the I&Q engine.
Low band function: Sin wave, I&Q modulation,arbitrary signal waveform (raw data file) and modulated any low band signal into RF signal with AM, FM and PM.
Pulse signal modulation:pulse width 0.25us~5s, repeat time: 40us~20S(single frequency), 400us~20s (Sweeping and hopping)
Dimensions: 100mm x 25mm x 25mm (L x W x H)
Features:
Probe size USB device, with N connector and solid metal case
I&Q connector provides I&Q input and output
Intuitive PC program GUI inspired by desktop instrument front panel
Provides I&Q engine for easy generation of many useful modulations
Multi-modulation solutions achieving simulation of: TDMA, CDMA , hopping
system, and most of the useful systems
Built-in arbitrary function generator to Low band signal output
Pulse output at rear panel for Synchronization or work as Pulse generator
Extra Low cost, extra low weight, best performance for price
Reference clock input and output
USB type C port without extra battery pack Standalone working with only 5V power.
Offline work only with 5V source power.
(주)엘텍알에프
제품문의:serviceltechrf@gmail.com
https://ltech.co.kr/pages/Contact
스펙
Specification:
Frequency Range: 1MHz to 6.1GHz (RF band) 100Hz to 1MHz (Low band), 1Hz resolution, 0.5PPM clock accuracy.
Output level range: -100dBm~+10dBm (1MHz ~4GHz), -100dBm~+0dBm (4GHz ~6.1GHz), -50dBm~0dBm (Low band), 0.25dB resolution.
Working mode: CW mode, frequency sweeping, frequency hopping, pulse modulation and simultaneous I&Q modulation(100KB data buffer).
Analog modulation: AM, FM, PM.
Digital modulation: ASK, FSK, 4FSK, GFSK, MSK, GMSK, SFSK, and more modulation signal based on the I&Q engine.
Phase modulation: BPSK, 4PSK, 8PSK, 16QAM, 32QAM, 64QAM and more modulation signal based on the I&Q engine.
Low band function: Sin wave, I&Q modulation,arbitrary signal waveform (raw data file) and modulated any low band signal into RF signal with AM, FM and PM.
Pulse signal modulation:pulse width 0.25us~5s, repeat time: 40us~20S(single frequency), 400us~20s (Sweeping and hopping)
Dimensions: 100mm x 25mm x 25mm (L x W x H)
Features:
Probe size USB device, with N connector and solid metal case
I&Q connector provides I&Q input and output
Intuitive PC program GUI inspired by desktop instrument front panel
Provides I&Q engine for easy generation of many useful modulations
Multi-modulation solutions achieving simulation of: TDMA, CDMA , hopping
system, and most of the useful systems
Built-in arbitrary function generator to Low band signal output
Pulse output at rear panel for Synchronization or work as Pulse generator
Extra Low cost, extra low weight, best performance for price
Reference clock input and output
USB type C port without extra battery pack Standalone working with only 5V power.
Offline work only with 5V source power.
(주)엘텍알에프
제품문의:serviceltechrf@gmail.com
https://ltech.co.kr/pages/Contact
- 이전글GNSS 신호 시뮬레이션 PORTOS A8 (8채널 / RAD GNSS-INS 통합 연구 플랫폼)시스템 26.11.17
- 다음글종합카다록-엘텍알에프는 mmWave ,레이다,통신,카토막 분야의 최대 선두 기업인 ELVA-1 26.11.05
댓글목록
💬 등록된 댓글이 없습니다.