RF 장터 게시판 글답변

	총 게시물 2,938건, 최근 3 건 안내

글답변

· 이름

· 패스워드

· 이메일

· 홈페이지

· 옵션

html

· 분류

· 제목

· 내용

> 
 > 
 > 제품명 : Electrometer/High resistance system 
> 
> 모델명 : 6517
> 
> 제조사 : Keithley
> 
> 
> 제품설명 : 
> 
> Full range of functions - Exceptional sensitivity and
> accuracy for voltage, current, charge, and VfI resistance
> and resistivity (surface and volume) measurements.
> With the Models 65 17-RH and 65 17-TP, relative
> humidity and external temperature can be measured.
> Voltage source - The internal lOOOV V-Source can be
> configured with the ammeter to make V/I resistancehesistivity
> measurements, and to force voltage, measure
> current.
> Two-line display -Readings and front panel messages
> are provided on the top line (primary) 20-character, and
> bottom line (secondary) 32-character alphanumeric display.
> The multiple display provides supplemental information
> about the reading, such as min/max readings,
> bar graphs for the reading, and time and date.
> Reading and setup storage - Readings and setup data
> can be stored and recalled from memory. Over 15,000
> readings can be stored in the buffer, and up to 10 instrument
> setups can be stored in memory.
> Test sequences - Built-in tests for the following applications:
> device characterization, resistivity. surface insulation
> resistance, and voltage sweeps.
> GPIB interface - Accommodates two separate languages
> for IEEE-488 operation. The SCPI language
> conforms to the IEEE-488.2 and SCPI standards. The
> 617 emulation mode (DDC language) allows the instrument
> to be controlled using device-dependent command
> programming.
> RS-232 interface -The instrument can instead be controlled
> over this serial interface using SCPI commands.
> Talk-only mode -From the front panel. you can set the
> instrument to send readings to a printer. Talk-only is
> available over both the GPIB and RS-232 interfaces.
> Scanning - The Model 6517 has an option slot that
> will accommodate an optional scanner card (Models
> 652 1 and 6522). The instrument can also be configured
> to operate with an external switching system (i.e.. Model
> 7001 or 7002) to scan external channels.
> Trigger link - This is a new trigger concept that provides
> more versatile and precise external triggering. It
> is in addition to the standard Trigger Tn/Meter Complete
> Out BNC external triggering techniques.
> Digital calibration - The instrument may he digitally
> calibrated from either the front panel. or over the RS-
> 232 interface or GPIB bus (SCPI language).
> 
> 
> 
> -제품문의는 010-8200-7982, 02-6672-7813 으로 전화주세요 -
 > 
 >

· 파일 + -

· 자동등록방지

자동등록방지

자동등록방지 숫자를 순서대로 입력하세요.