총 게시물 2,789건, 최근 0 건 안내 글쓰기
이전글  다음글  목록 수정 삭제 답변 글쓰기
[중고판매]

고정밀 LCR미터 LCR-6200 판매합니다.

글쓴이 : 송해종 날짜 : 2016-12-09 (금) 10:21 조회 : 1662



GW사의 고정밀 LCR미터 판매합니다.


원하시면 제품 교육도 가능합니다. 원하는 값을 엑셀이나 그림파일로 보실수 있습니다.


새장비입니다. 보증기간 남아 있어서 보증수리 가능합니다.


010-5279-9529 연락주세요. 소비자가격은 270만원정도 합니다.


급전이 필요해서 급하게 내놓습니다. 연락주세요.




20161209_101300.png
 
naver_com_20161209_101355.jpg


gwinstek_co_kr_20161209_100819.jpg
 
gwinstek_co_kr_20161209_100825.jpg
 
LCR_6000.png




?


 

dot_2.gif 10Hz~2kHz/20kHz/100kHz/200kHz/300kHz
dot_2.gif 0.05% 기본 정확도
dot_2.gif 연속적인 테스트 주파수 설정
dot_2.gif 3.5인치 컬러 LCD
dot_2.gif 측정 속도 : 최대 25ms
dot_2.gif Full/Spot 주파수 OPEN/SHORT 캘리브레이션
dot_2.gif 16개 측정 조합 + 2개 파라미터 모니터링

dot_2.gif DCR 측정 및 내부 DC 바이어스(±2.5V)
dot_2.gif PASS/FAIL 판정 기능
dot_2.gif ALC(Auto Level Control) 기능
dot_2.gif BIN 기능 : 9BIN + 1AUX
dot_2.gif 10개 스텝 테스트 기능(주파수/전압/전류)
dot_2.gif RS-232C, Handler, USB(Host) 인터페이스
dot_2.gif 2U, 1/2 랙 사이즈 설계



- 10Hz~2kHz/20kHz/100kHz/200kHz/300kHz
- 0.05% 기본 정확도
- 연속적인 테스트 주파수 설정
- 3.5인치 컬러 LCD
- 측정 속도 : 최대 25ms
- Full/Spot 주파수 OPEN/SHORT 캘리브레이션
- 16개 측정 조합 + 2개 파라미터 모니터링
- DCR 측정 및 내부 DC 바이어스(±2.5V)
- PASS/FAIL 판정 기능
- ALC(Auto Level Control) 기능
- BIN 기능 : 9BIN + 1AUX
- 10개 스텝 테스트 기능(주파수/전압/전류)
- RS-232C, Handler, USB(Host) 인터페이스
- 2U, 1/2 랙 사이즈 설계



상세설명

GW Instek introduces the brand new high precision LCR meter─LCR-6000 series, which, with five models, has a test frequency range extending from 2kHz/20kHz/100kHz/200kHz/300kHz (maximum) and with 0.05% basic accuracy. The compact size design, 2U height and 1/2 rack, is one of the practical features of the series which is the optimum space saver suitable for either bench top or system rack. The compacted LCR-6000 series with abundant features is absolutely the excellent tool for R&D, production test, IQC, etc. on implementing each test stages for passive components.

The LCR-6000 series provides rich functionalities with the compact size. First of all, the entire series adopts 3.5-inch color LCD and features opulent display parameters. In addition to simultaneously displaying setting criteria and measurement results, the series increases two additional monitoring parameters. In other words, there are four parameters, primary/secondary and two monitoring, simultaneously shown on the screen that tremendously enhances the measurement efficiency. The enlarge display mode not only emphasizes the measurement results, but also provides PASS/FAIL judgment to facilitate a rapid and convenient test result.

Convenience is one of the unique features. The LCR-6000 series comes equipped with two zero methods, which are full frequency range and spot. Users, without turning off the power and changing test fixture, can freely change frequency within the provided frequency range to conduct measurements. By so doing, tremendous time can be saved from repeatedly executing zero operation. Additionally, frequency range of the series is consecutive that allows users to input precise frequency value to conduct the most genuine test on components.

The LCR-6000 series also features diverse ancillary measurements to meet the measurement requirements of different materials. For instance, the series provides the automatic level control (ALC) function to satisfy the test voltage requirement of MLCC. For inductive component measurements, the series provides the adjustable test current function and the D.C. resistance measurement function. The optional external bias current adapter (±2.5A) is to satisfy the measurement requirements. With respect to the D.C. bias voltage test for capacitive components requirements, the series allows users to conduct verification measurement on materials by its internal ±2.5V adjustable voltage or via an optional external bias voltage adapter (±45V). Furthermore, 10 steps of listed test functionalities allow users to set testing parameters (either by frequency, or voltage, or current) for each step based on users’ requirements in order to observe the trend of DUT characteristics.

The LCR-6000 series has 10 memory sets defined by panel setting criteria to facilitate users in selecting test criteria and saving time in repeated settings. 10,000 measurement result storage capability can easily record measurement results instantaneously. The USB host allows easy access to recorded results without connecting the series to the PC. The USB host also allows USB to retrieve and save screen so as to assist users in compiling setting guidelines.

For the external control, the LCR-6000 series provides handler interface and collocates with its measurement sorting function (9BIN, AUX: 1BIN) to facilitate the connection with sorting machine so as to sort out the materials. For remote control and measurement result retrieval requirements, the LCR-6000 series provides RS-232Cto assist setting control or measurement result retrieval via the PC commands. Additionally, the free PC software gives users an instant tool to store measurement results that saves time in developing programs.

The brand new compacted LCR-6000 series can effectively improve the limitation of space. Diverse measurement functionalities and display methods are making the series the high CP ratio choice in meeting the requirements of R&D, component assessment for engineering departments, category sorting requirements for component production, and IQC for verification on component specifications.


Consecutive frequency and Convenient zero function

The LCR-6000 series, within the provided frequency range, features consecutive and adjustable frequency capability which allows users to conduct measurement and analysis on components with the most genuine frequency requirements. For OPEN/SHORT fixture compensation function, the LCR-6000 series is equipped with full frequency range zero and spot zero selections. After executing full frequency range zero, users, under the conditions of not turning off the power and not changing test fixture, can freely change test frequency for the LCR-6000 series to execute component measurements that tremendously saves time in repeatedly zeroing test fixture after changing frequency.

LCR6000-01.jpg
 Consecutive and adjustable frequency
 Freely input frequency within provided frequency range

LCR6000-02.png
Selectable fixture zeroing methods
 Full frequency range zero or spot zero


Rich and diverse information display

The measurement result display of the LCR-6000 series not only reveals primary and secondary measurement parameters but also includes two monitoring parameters. Therefore, four DUT related parameters can be simultaneously shown on the display screen to save time if repeated measurements are required. With respect to display screen, the LCR-6000 series features diverse display to meet users’ observation requirements. For instance, MEAS display shows setting parameters and measurement results at the same time; ENLARGE display focuses on measurement results and PASS/FAIL judgment is available, which is conducive to assist engineers to swiftly obtain the validity of measurement results.

LCR6000-03.png
 MEAS display
Parameter setting and four measurement parameters 

LCR6000-04.jpg
ENLARGE display
Enlarge measurement results and include PASS/FAIL judgment


10 points listed tests and PC software

The LCR-6000 series provides the 10 points listed test function, which allows users to define a set of DUT measurement parameters (such as Cs- Rs) and to set 10 test criteria of category (either by frequency or by voltage or by current) but different values to conduct measurements. Through this function, users can rapidly and clearly obtain DUT’s characteristic variation trend to determine the adaptability of DUT’s practical applications. The measurement results can be recorded directly in the internal memory and be transferred to the PC through USB. The LCR-6000 series also provides free PC software (maximum 1,000 points listed tests) in order to satisfy users’ analytical requirements on delicate variation.

LCR6000-05.png
 Listed tests
Variation criteria based upon frequency or voltage/current

LCR6000-06.png
On software ─ characteristic curve
Provide more delicate characteristic variation trend


Diverse ancillary measurement functions

To satisfy the diverse measurement application requirements for different components and materials, the LCR-6000 series collocates with many auxiliary measurement functions. For capacitor measurement, Automatic Level Control (ALC) is mainly for component which requires a constant or rated test voltage such as multi-layer ceramic capacitor (MLCC). An internal D.C. bias voltage (±2.5V, internal) is allowing simulating A.C. and D.C. coexistence to learn capacitance variation. For inductor measurement, the D.C. resistance measurement function is to validate D.C. resistance characteristics. Additional, the LCZ function is to quickly identify components ’characteristics. When the function is activated, the LCR-6000 series will automatically determine DUTs’ characteristics and reveal the optimum parameters to show the measurement results.

LCR6000-07.jpg
Automatic level control
Ideal for measuring components with voltage requirements

LCR6000-08.jpg
Internal bias (±2.5V adjustable)
Ideal for capacitive components’ characteristic tests  

LCR6000-09.jpg
 D.C. resistance measurement
Ideal for inductive components’ D.C. characteristics verification


 

Standard Interface

For interface connectivity, the LCR-6000 series comes equipped with handler interface and RS-232C interface. Handler outputs 10 BIN (9BIN, AUX: 1BIN) sorting results that is best for external connection control, for instance, connecting to a sorting machine to conduct components’ sorting operation. RS-232C is suitable for remote control and measurement results retrieval. The PC gives commands to control settings or to read measurement results so as to achieve the requirements of verifying automotive applications.

LCR6000-10.jpg

 



photo_icon2.gif

? 상세사양

TEST FREQUENCY

 

LCR-6300: 10Hz~300kHz(±0.01%) (4 digits resolution)
LCR-6200: 10Hz~200kHz(±0.01%) (4 digits resolution)
LCR-6100: 10Hz~100kHz(±0.01%) (4 digits resolution)
LCR-6020: 10Hz~ 20kHz(±0.01%) (4 digits resolution)
LCR-6002: 10Hz~  2kHz(±0.01%) (4 digits resolution)

OUTPUT IMPEDANCE

 

30Ω / 50Ω / 100Ω selectable

BASIC ACCURACY

Slow / Med

0.05%

Fast

0.1%

TEST SPEED

 

FAST:25ms / MED:100ms / SLOW:333ms

TEST SIGNAL LEVELS

Voltage

10.00mV- 2.00V (±10%)   CV :10.00mV- 2.00V(±6%)

Current

100.0uA- 20.00mA (±10%) CC :100.0uA- 20.00mA(±6%) (@2VMax)

DC BIAS

Internal

±2.5V (0.5%+0.005V)

DISPLAYRANGE

R, X, |Z|

G, B, |Y|

L

C

D

Q

θd

θr

DCR

Δ%

0.00001Ω ~ 99.9999MΩ

0.01nS ~ 999.999S

0.00001uH ~ 9999.99H

0.00001pF ~ 9999.99mF

0.00001 ~ 9.99999

0.00001 ~ 99999.9

-179.999° ~ 179.999°

-3.14159 ~ 3.14159

0.00001Ω ~ 99.9999MΩ

-99999% ~ 99999%

TEST MODE

16 Combinations

Cs-Rs, Cs-D, Cp-Rp, Cp-D, Lp-Rp, Lp-Q, Ls-Rs, Ls-Q,
Rs-Q, Rp-Q, R-X, Z-θr, Z-θd, Z-D, Z-Q, DCR

Monitor parameter (2 selectable)

Z, D, Q, Vac, Iac, Δ, Δ%, θr, θd, R, X, G, B, Y

LISTED MODE

 

10 steps

BIN FUNCTION

 

Comparator (9BIN,AUX:1BIN)

MEMORY

INT ? panel setting

10 file name

INT ? measured data

10000 Data(.csv)

USB storage

10 file name for setting, 9999 file name for data, 999 Log file for LCD screen

OTHER FUNCTION

Auto Level Control (ALC)

ON/OFF

Average

1~256 times

Trigger

INT / MAN / EXT / BUS

Delay

0ms~60s

Judgment

PASS / FAIL

Auto LCZ

ON / OFF

Screen Capture

Saving in to USB (Bmp form)

DISPLAY

 

3.5'LCD, RGB color (320x240)

INTERFACE

 

RS-232(SCPI), Handler, USB Host

POWER SOURCE

 

AC 90V-250V, 50-60Hz, Max. 30VA

DIMENSION & WEIGHT

 

265(W)x107(H)x312(D) mm, Approx.3kg

 


구성품



이전글  다음글  목록 수정 삭제 답변 글쓰기