제품명 : Electrometer/High resistance system
모델명 : 6517
제조사 : Keithley
제품설명 :
Full range of functions - Exceptional sensitivity and
accuracy for voltage, current, charge, and VfI resistance
and resistivity (surface and volume) measurements.
With the Models 65 17-RH and 65 17-TP, relative
humidity and external temperature can be measured.
Voltage source - The internal lOOOV V-Source can be
configured with the ammeter to make V/I resistancehesistivity
measurements, and to force voltage, measure
current.
Two-line display -Readings and front panel messages
are provided on the top line (primary) 20-character, and
bottom line (secondary) 32-character alphanumeric display.
The multiple display provides supplemental information
about the reading, such as min/max readings,
bar graphs for the reading, and time and date.
Reading and setup storage - Readings and setup data
can be stored and recalled from memory. Over 15,000
readings can be stored in the buffer, and up to 10 instrument
setups can be stored in memory.
Test sequences - Built-in tests for the following applications:
device characterization, resistivity. surface insulation
resistance, and voltage sweeps.
GPIB interface - Accommodates two separate languages
for IEEE-488 operation. The SCPI language
conforms to the IEEE-488.2 and SCPI standards. The
617 emulation mode (DDC language) allows the instrument
to be controlled using device-dependent command
programming.
RS-232 interface -The instrument can instead be controlled
over this serial interface using SCPI commands.
Talk-only mode -From the front panel. you can set the
instrument to send readings to a printer. Talk-only is
available over both the GPIB and RS-232 interfaces.
Scanning - The Model 6517 has an option slot that
will accommodate an optional scanner card (Models
652 1 and 6522). The instrument can also be configured
to operate with an external switching system (i.e.. Model
7001 or 7002) to scan external channels.
Trigger link - This is a new trigger concept that provides
more versatile and precise external triggering. It
is in addition to the standard Trigger Tn/Meter Complete
Out BNC external triggering techniques.
Digital calibration - The instrument may he digitally
calibrated from either the front panel. or over the RS-
232 interface or GPIB bus (SCPI language).
-제품문의는 010-8200-7982, 02-6672-7813 으로 전화주세요 -
